Yamaha CLP295 Owner'S Manual Download Page 36

Page: 36 / 232

Quic

k Guide

CVP-409/407 Owner’s Manual

Playing Songs saved to USER (page 43)

Press the [SONG SELECT] button to call up the Song selection display.

Press the TAB [

√

][

] button to select the USER tab.

Press one of the [A]–[J] buttons to select the desired Song.

Select the file to which the data is saved.

You can also select the specified file to which the data is saved by pressing the [USER] button.
[USER]

→

[A] SONG

→

[A]–[J]

Playing Songs saved to a USB storage device (page 43)

For information on using USB storage devices, see page 22.

Connect the USB storage device to the [USB TO DEVICE] terminal.

Press the [SONG SELECT] button to call up the Song selection display.

Press the TAB [

√

][

] buttons to select the USB tab (“USB1”/“USB2”), corresponding to the USB storage device

you inserted in Step 1.
The indication “USB1”/“USB2” will be displayed depending on the number of the connected devices.

Use the [A]–[J] buttons to select a Song.

Select the file to which the data is saved.

You can also select the specified file to which the data is saved by pressing the [USB] button.
[USB]

→

[A] SONG

→

[A]–[J]

Playing Songs in sequence

You can play all Songs in a folder continuously.

Select a Song in the desired folder.

Call up the operation display.
[FUNCTION]

→

[B] SONG SETTING

Press the [H] (REPEAT MODE) button to select “ALL.”

Press the SONG [PLAY/PAUSE] button to start playback.
All Songs in the folder play back continuously, in order.

Press the SONG [STOP] button to stop continuous playback.

To turn off the Song sequence playback, press the [H] button to select “OFF” in the display in step 2.

Summary of Contents for CLP295









































































































































































































































Search results

Summary of Contents for CLP295

Reviews:

Related manuals for CLP295

Brands by name

Popular brands

Yamaha CLP295, Owner'S Manual

Search results

Summary of Contents for CLP295

Reviews:

Related manuals for CLP295

Brands by name

Popular brands