Using
Your Instrument with Other Devices
CVP-409/407 Owner’s Manual
193
n
The Sostenuto and Portament functions will not affect the Organ Flute Voices, even they have been assigned to the Foot Pedals.
Adjustable Parameters for Each Function
The parameters below correspond to buttons [2
π†
]–[8
π†
], and their availability depends on the selected control
type. For example, if SUSTAIN is selected as the type, the parameters “HALF PEDAL POINT,” “RIGHT 1,” “RIGHT 2”
and “LEFT” automatically appear in the display.
INTRO1–3
Same as the [INTRO I–III] buttons.
MAIN A–D
Same as the [MAIN VARIATION A–D] buttons.
FILL DOWN
Plays a fill-in, which is automatically followed by the Main section of the button on the
immediate left.
FILL SELF
Plays a fill-in.
FILL BREAK
Plays a break.
FILL UP
Plays a fill-in, which is automatically followed by the Main section of the button on the
immediate right.
ENDING1–3
Same as the [ENDING/rit. I–III] buttons.
FADE IN/OUT
Switches Fade In /Fade Out function on and off.
FINGERED/FING ON BASS
The pedal alternately switches between the Fingered and On Bass modes (page 107).
BASS HOLD
While the pedal is pressed, the Accompaniment Style bass note will be held even if the
chord is changed during Style playback. If the fingering is set to “AI FULL KEYBOARD,”
the function does not work.
PERCUSSION
The pedal plays a percussion instrument selected by the [4
π†
]–[8
π†
] buttons. You
can use the keyboard to select the desired percussion instrument.
DUAL ON/OFF
Same as the PART ON/OFF [DUAL (RIGHT2)] button.
SPLIT ON/OFF
Same as the PART ON/OFF [SPLIT (LEFT)] button.
OTS+
Calls up the next One Touch Setting.
OTS–
Calls up the previous One Touch Setting.
SONG, STYLE, MIC, LEFT, RIGHT1,
RIGHT2
These specify the part(s) that will be affected by the pedal.
HALF PEDAL POINT*
You can specify how far down you should press on the pedal until the damper or soft
effect (page 192) starts working.
DEPTH
Determines the depth of the pedal effect.
UP/DOWN
When GLIDE or PITCH BEND is selected, this determines whether the pitch change is
raised or lowered.
RANGE
When GLIDE or PITCH BEND is selected, this determines the range of the pitch
change, in semitones. Linked to the Mixing Console
→
Pitch Bend Range (page 90) set-
ting.
ON SPEED
When GLIDE is selected, this determines the speed of the pitch change, when the pedal
is pressed.
OFF SPEED
When GLIDE is selected, this determines the speed of the pitch change, when the pedal
is released.
KIT
When PERCUSSION is assigned to the pedal, all available drum kits are shown here,
letting you select the particular drum kit used for the pedal.
PERCUSSION
When PERCUSSION is assigned to the pedal, all sounds of the selected drum kit (in KIT
above) are shown here. This determines the particular instrument sound assigned to the
pedal.
Using the Footswitch or Foot Controller ([AUX PEDAL] jack)