Yamaha CLP295 Owner'S Manual Download Page 67

Page: 67 / 232

Basic Oper

ation

Basic Displays (Main Display and File Selection Display)

CVP-409/407 Owner’s Manual

File Selection Display Basic Operation

Select the tab containing the desired file by using the TAB [

√

][

]

buttons.

Select the page containing the desired file by using the [1

]–[7

]

buttons ([1

]–[5

] buttons for Voice, [1

]–[6

] buttons for Song

and Style).

Select the file. There are two ways to do so.

• Press one of the [A]–[J] buttons.
• Select the file by using the [DATA ENTRY] dial, then press the [ENTER]

button to execute.

Press the [EXIT] button to return to the previous display.

Select the file to which the
data is saved.

You can also select the specified
file to which the data is to be
saved by pressing the [USB]/
[USER] buttons.
[USB]/[USER]

→

[A] SONG/[B]

STYLE/[F] VOICE

→

[A]–[J]

This display shows the Voice files
in a folder.

The next highest level—in this case,
folder—is shown. Each folder shown in
this display contains appropriately cat-
egorized Voices.

Closing the current folder and calling up the next highest level
folder

To close the current folder and call up the next highest level folder, press
the [8

] (UP) button.

Example of the PRESET Voice Selection display

The PRESET Voice files are categorized and contained in appropriate folders.

Summary of Contents for CLP295









































































































































































































































Search results

Summary of Contents for CLP295

Reviews:

Related manuals for CLP295

Brands by name

Popular brands

Yamaha CLP295, Owner'S Manual

Search results

Summary of Contents for CLP295

Reviews:

Related manuals for CLP295

Brands by name

Popular brands