CVP-105
33
2HD disk not valid! Copy to 2DD disk.
This message appears if a 2HD disk is used when performing conversion of the recorded data.
Press
OK
and copy the song data to be converted to a 2DD disk, then perform the data conversion using the disk.
Completed! Song No.##
Following conversion of the song data, this message displays the song number to which the data was saved.
Song Data Conversion
Host is offline!
This message appears when the host computer is not turned on, the connecting cable is not properly connected, the
HOST SELECT
switch is
not in the proper position, or the
MIDI
driver or
MIDI
application is not active.
Turn off both the Clavinova and the host computer. Check the cable connection and the position of the
HOST SELECT
switch,
then turn on the computer first, followed by the Clavinova.
Back up data erased and replaced by factory data.
The Clavinova will retain data protected by the Backup function as long as it is used regularly. If the instrument is not turned on for a week or
longer, however, the data may be lost. This message appears when the Clavinova is turned on after data has been lost. It also appears when you
recall all factory data.
Hardware error!
The Clavinova has detected a problem in the hardware during the initial system check performed when the power was turned on.
Clean the disk drive!
The disk head is dirty. Clean the disk head using a commercially available head cleaning disk.
Hardware-related