28
Spee
dometer uni
t
System voltage display
BATTERY or BAT shows the supplied volt-
age to the meter circuit. The system voltage
display differs from the tachometer unit volt-
age display (battery voltage). In addition, the
voltage value may be changed according to
the meter connection specifications.
When the battery voltage decreases to 12
volts or less or increases to 16 volts or more
the voltage value blinks.
CAUTION:
• When the low battery voltage warning
comes on, check the battery and the
wiring.
• If you cannot locate and correct the
cause, consult a Yamaha dealer.
Clock (optional: GPS has been installed)
The clock shows the time in 12 hours. The
local time is easily displayed by calculating
the longitude information received from the
GPS communication data. Set the time as
necessary.
Setting the time:
1.
: To activate the time setting mode
and switch to the time setting display.
2.
: To change the minutes. Press
and hold to advance quickly.
3.
: To set the hours.
4.
: To change the hours. Press and
hold to advance quickly.
5.
: To set the time and return to the
normal display.
Resetting the time:
1.
: To activate the time setting mode
and to switch to the time setting display.
2.
+
(1 second): To reset the
time to “0:00” and return to the normal
display.
Blinks
Blinks
System voltage display/Clock
