45
NOTE:
• The default setting of the fuel tank capac-
ity is 50 G (190 L). The maximum fuel tank
capacity can be set to 1,999 gallons or
1,999 liters.
• Depending on the position of the fuel out-
let and the position of the boat while cruis-
ing, the usable fuel may decrease. Be
sure to check the available fuel capacity
before setting the default setting.
• To change the displayed unit, see “UNIT
(setting displayed units)” in “Changing set-
tings (custom mode).”
• Press the
and
buttons for 1
second from step 4 to change the default
setting to “0.”
• AVAL shows 90 percent of the specified
fuel tank capacity.
CALIBRATION (setting correction value)
You can calibrate the displayed fuel flow
value within –7 to +7 percent. The difference
in the fuel consumption display and the
actual fuel consumption is calibrated.
Checking the calibration value:
1.
Operate the outboard motor on a full
tank of fuel.
2.
After operating the outboard motor, fill
the fuel tank. Compare the amount of
fuel filled into the fuel tank with the fuel
consumed shown on the fuel consump-
tion display and set the calibration value
to the difference if necessary.
Changing the calibration value:
1.
Turn the engine off and the engine start
switch to ON.
2.
(4 seconds): To activate the cus-
tom mode.
3.
(3 times): Press to switch
between the setting function names.
4.
: To switch to the change settings
display.
5.
: Press to switch between the cali-
bration values.
6.
(1 second): To change the cali-
bration value and return to the custom
mode selection display.
Blinks
CALIBRATION (setting correction value)
