11
NOTE:
• Trolling is affected by currents and other
operating conditions and may differ from
the actual engine speed.
• The default engine idle speed is reset
automatically when the display is switched
to the normal display. The default engine
idle speed is also reset automatically
when the engine is turned off or when the
engine speed exceeds 3,000 r/min.
• When warming up a cold engine, the troll-
ing speed cannot be decreased below the
specified engine idle speed.
• Depending on the model of the outboard
motor, some functions may not be com-
patible. For information on models which
contain the compatible functions, consult
a Yamaha dealer.
Changing settings (custom mode)
Switching to custom mode
In the custom mode, you can change the
meter function settings. “CUSTOM” and
each setting function name are scrolled on
the meter.
1.
Turn the engine off and the engine start
switch to ON.
2.
(4 seconds): To activate the cus-
tom mode.
3.
: Press to switch between the set-
ting function names (custom mode
selection display).
4.
: To switch to the change settings
display.
MAINTENANCE
(resetting maintenance intervals)
TRIM 0SET (setting trim angle)
ENGINE NUMBER
(setting corresponding engine)
FORM (setting display format)
DISPLAY (setting displays)
Changing settings (custom mode)
