19
ENGINE NUMBER (setting
corresponding engine)
You can select the engines that are compat-
ible to this meter. The port outboard motor is
set to “No.1 (engine number 1)” and the
starboard outboard motor is set to “No.2
(engine number 2).”
1.
Turn the engine off and the engine start
switch to ON.
2.
(4 seconds): To activate the cus-
tom mode.
3.
(4 times): Press to switch
between the setting function names.
4.
: To switch to the change settings
display.
5.
: To switch between the displayed
engine numbers.
6.
(1 second): To change the corre-
sponding engine and return to the cus-
tom mode selection display.
7.
(1 second): To return to the nor-
mal display.
NOTE:
• The meters are set at the factory to “No.1
(engine number 1).”
• To engine number, see “Resetting engine
number” in “Service functions.”
No.1 (engine number 1)
No.2 (engine number 2)
No.4 (engine number 4)
No.3 (engine number 3)
ENGINE NUMBER (setting corresponding engine)
