10
Ta
chometer unit
Changing backlight settings
You can turn the backlight on or off, or
change the brightness level of the backlight
for all meters synchronized. You can also
change the settings for each meter individu-
ally.
1.
+
: To activate the backlight
mode.
2.
: Press to switch between the five
brightness levels (1–5).
: To switch between “LIGHT ON”
and “LIGHT OFF.”
3.
+
: To return to the normal
display.
NOTE:
• The backlight default settings are “LIGHT
OFF,” brightness level 1, and “SYNC.”
• If no operations are carried out for 5 sec-
onds or more, the display returns to the
normal display.
• The backlight settings can be changed
from all meters and all displays.
• When “SYNC” is displayed, all meters
operate simultaneously and can be
changed synchronized. Press the
button for 1 second to set “SYNC”
so that it is not displayed and to change
the meters individually.
Adjusting trolling speed
You can adjust the trolling speed randomly
by increasing or decreasing it approximately
50 r/min.
When in the trolling speed setting mode, the
display switches to the normal display when
the engine speed is increased (within 3,000
r/min) using the throttle. When the throttle is
closed, the display returns to the trolling
speed setting mode.
This function is not available for outboard
motors that are not equipped with the trolling
speed adjustment function.
1.
(1 second): To activate the trolling
speed setting mode.
2.
: To decrease the engine speed.
3.
: To increase the engine speed.
4.
(1 second): To return to the nor-
mal display and to the default engine
idle speed.
Changing backlight settings/Adjusting trolling speed
