86
Appendix
Assembling the Clavinova
After completing the assembly, please
check the following.
• Are there any parts left over?
Review the assembly procedure and correct any
errors.
• Is the instrument clear of doors and other
movable fixtures?
Move the instrument to an appropriate location.
• Does the instrument make a rattling noise
when you shake it?
Tighten all screws.
• Does the pedal box rattle or give way when
you step on the pedals?
Turn the adjuster so that it is set firmly against the
floor.
• Are the pedal and power cords inserted
securely into the sockets?
Check the connection.
• If the unit creaks or is otherwise unsteady
when you play on the keyboard, refer to the
assembly diagrams and retighten all screws.
CAUTION
• When moving the instrument after assembly, always
hold instrument by the lower surface in the front of the
main unit and by the handles in the rear panel.
• Do not hold the key cover. Improper handling can result
in damage to the instrument or personal injury.
Do not hold here.
Hold here.
After transporting the instrument, place the
instrument so that the rear side of the instrument is 1–
2cm away from the wall to ensure optimum
performance of the GP Soundboard Speaker function
(page 15).
