83
Appendix
Assembling the Clavinova
1.
Attach E and F to D.
1-1
Secure D using the four 6 x 20 mm long
screws.
1-2
Remove the twist tie from the folded pedal
cord.
Do not remove the twist tie located next to the hole.
Don’t discard the twist tie, you’ll need it later in
step 6.
2.
Attach B.
2-1
Insert B between E and F as shown in the
illustration.
2-2
Align and attach B to the front side of D, E
and F.
2-3
Secure B using the 4 x 14mm thin screws.
* Insert two screws into the smaller holes on the brackets.
2-4
Temporarily secure with 4 x 14mm thin
screws.
* Insert four screws into the smaller holes on the brackets.
3.
Lay A into position.
Align the screw threads on the bottom of A with
the screw threads of E and F, while gently lowering
A into position.
CAUTION
• Be extra careful not to drop or let your fingers be pinched
by the main unit.
• Do not hold the main unit in any position other than the
position specified above.
E
D
F
1-1
1-2
F
E
B
D
2-3
2-4
A
F
E
15cm
15cm
Place your hands at least 15 cm
from either end of A when
positioning it.