23
Advanced Functions
Playing various musical instrument sounds (Voices)
Three different effects are provided to enhance the sounds of the keyboard. Applying these effects gives you
greater and richer expressive capabilities.
[BRILLIANCE]
You can use this control to adjust the brilliance of the tone. This setting is applied
commonly to all Voices.
Press the BRILLIANCE [MELLOW]/[BRIGHT] buttons to select the
desired tonality.
• Mellow1 – 3
Soft and mellow tone. The sound becomes more mellow and rounder as the
number increases.
• Normal
Standard tone.
• Bright1 – 3
Bright tone. The sound becomes brighter as the number increases.
[REVERB]
This control adds reverberation to the sound by simulating the natural
reverberation of a concert hall.
Pressing the [REVERB] button repeatedly toggles the reverb on and off.
Even if the reverb effect is turned off, a “soundboard reverb” effect will be applied
when the Voice in the [GRAND PIANO1]–[GRAND PIANO4] is selected.
[CHORUS]
This control adds warmth and spaciousness to the sound.
Pressing the [CHORUS] button repeatedly toggles the chorus on and off.
You can also turn the chorus effect on and off by setting “ChorusOnOff ” parameter
in Voice Setting on page 63. The [CHORUS] ON/OFF button setting on the panel is
temporary. That is, if you select another Voice, the chorus setting for the previous
Voice is cancelled. The Chorus On Off parameter setting is saved for each Voice.
That is, if you select a given Voice, the chorus setting is automatically turned on or
off according to the saved chorus setting.
Enhancing and customizing the sound — [BRILLIANCE]/[REVERB]/
[CHORUS]
BRILLIANCE [MELLOW] [BRIGHT] buttons
[REVERB] button
[CHORUS] button
Default setting:
Normal
NOTE
If you select Bright1 – 3 as the
type of brilliance, the volume
level will increase slightly.
Under this condition, if you
raise the [MASTER VOLUME]
dial setting, the sound may
become distorted. If this
happens, lower the volume
accordingly.
Normal
Brilliance
Default setting:
ON
NOTE
You can select a reverb type
via the Reverb Type parameter
in the “VOICE SETTING” menu,
and adjust the reverb depth for
the selected Voice via the
Reverb Send parameter. (See
page 62.)
Default setting:
The default chorus on/off
setting is different for each
Voice.
NOTE
You can select a chorus type
via the Chorus Type parameter
in the “VOICE SETTING” menu,
and adjust the chorus depth for
the selected Voice via the
Chorus Send parameter. (See
page 63.)
