–9–
J After securing the side stand
switch lead wire using this
clamp, first route the lead wire
between the pickup cover, the oil
filter cover, the A.C. generator,
and the starter motor. Next, as
with the engine lead wire, route
the lead wire through the right
side of the vehicle.
K Clamp the clutch hose.
L Secure the grommet of the
clutch hose by use of this holder
wire of the gusset.
G Route the air filter drain hose by
the front side of the carburetor air
vent hose and by the right side of
the vehicle body. To route to the
right side of the body, make sure
to set between the starter motor
and A.C.magneto.
H Route the speed sensor lead by
the right side of the vehicle body
along with the sidestand switch
lead.
I Mount the square fixture of the
clutch hose in parallel with the
cover.
D Clamp the #1 and #2 spark plug
leads using this clamp.
Clamp these cords above the #2
head cover mounting bolt.
E Make sure to tighten the frame
ground together with the igniter
unit attaching screw.
F Fasten the seat lock cable to the
seat rail with a clamp.
Point the tip of the clamp to the
downward.
SPEC
CABLE ROUTING
