–6–
SPEC
CABLE ROUTING
A Clamp the #3 and #4 spark plug
leads, on the head cover mount-
ing bolt at the #3 spark plug lead,
by use of clamp.
B Do not entangle the lead wires
and the hosing.
Pass the clump of lead wires and
that of hosing orderly as shown.
C Pass the air filter drain hose, fuel
tank drain hose and fuel tank
breather hose (total 3 hoses)
through the guide wire of the en-
gine.
D Clump the A.C.magneto lead,
pickup lead, sidestand switch
lead, starter motor cable and
carburetor heater lead (total 5
wires), by use of this clamp.
E Pass the wire harness between
the handle standing lug member
and the rear fender.
F Fasten the wire harness, thermo
switch lead to the seat rail at the
front end of the seat rail bracket
with a clamp. Point the tip of the
clamp to the downward.
G Clamp the wire harness.
H Pass the starter motor cable,
speed sensor lead and the bat-
tery negative lead through the in-
side of the seat rail.
