4 - 72
ENG
CDI MAGNETO
2. Install:
●
Woodruff key
1
●
Rotor
2
NOTE:
●
Clean the tapered portions of the crankshaft
and rotor.
●
When installing the woodruff key, make sure
that its flat surface
a
is in parallel with the
crankshaft center line
b
.
●
When installing the rotor, align the keyway
c
of the rotor with the woodruff key.
3. Install:
●
Plain washer
●
Nut (rotor)
1
Use the rotor holding tool
2
.
Rotor holding tool:
YU-01235/90890-01235
T
R
.
.
48 Nm (4.8 m · kg, 35 ft · lb)
4. Connect:
●
CDI magneto lead
Refer to “CABLE ROUTING DIA-
GRAM” section in the CHAPTER 2.
5. Install:
●
Gasket [crankcase cover (left)]
●
Crankcase cover (left)
1
●
Hose holder (cylinder head breather
hose)
2
●
Screw [crankcase cover (left)]
NOTE:
Tighten the screws in stage, using a crisscross
pattern.
New
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
