Operation
44
TIP:
The start-in-gear protection device prevents
the engine from starting except when in neu-
tral.
2.
Attach the engine shut-off cord to a se-
cure place on your clothing, or your arm
or leg. Then install the clip on the other
end of the cord into the engine shut-off
switch.
3.
Turn the main switch to “
” (on).
4.
Open the throttle slightly without shifting
using the neutral throttle lever or free ac-
celerator. You may need to change the
throttle opening slightly depending on
engine temperature. After the engine
starts, return the throttle to the original
position.
TIP:
●
On remote controls equipped with a neu-
tral throttle lever, a good starting point is to
lift the lever just until you feel resistance,
then lift slightly more.
●
The neutral throttle lever or free accelera-
tor can only be used when the remote con-
trol lever is in neutral.
5.
Press in and hold the main switch to op-
erate the remote choke system. The re-
mote choke switch automatically returns
to its normal position when you release
your hand. Therefore keep the switch
pressed in.
TIP:
●
It is not necessary to use the choke when
starting a warm engine.
●
Push in the main switch fully, or the remote
choke system will not operate.
6.
Turn the main switch to “
” (start),
and hold it for a maximum of 5 seconds.
OFF
ON
ZMU01880
N
ZMU02314
Summary of Contents for 115
