![background image](http://html.mh-extra.com/html/yamada/dvr-9300hx/dvr-9300hx_manual_894464036.webp)
DVD-/HDD-RECORDER – MD 80857
37
R
ECORDING
TO
DVD/
HARD
DISK
Close programming
`
When programming is complete move to the field
and confirm by
pressing
ENTER
. The recording data is transferred into the table.
`
Switch the unit to standby mode.
The automatic recording cannot start if the device is switched on.
If you have forgotten to switch off the device a message appears just
before the recording starts showing the remaining time until the
programmed recording.
Deleting a programmed recording
To remove a programmed recording from the list, open the timer menu
again. Move the cursor over the recording that you wish to delete. Press
CLEAR
on your remote control to delete the programme entry from the
list.
A new window requests that you confirm the deletion. To do so move the
cursor to the field
and press
ENTER
. The entry is deleted from the list.
Stopping a programmed recording
To stop a recording that has already started press
STOP
during recording.
You can also switch the device into standby mode to end a recording.
Summary of Contents for DVR-9300HX
Page 1: ...Manual DVR 9300HX ...
Page 59: ......