YAMADA DVR-9300HX, Manual

Page: 18 / 60

DVD-/HDD-RECORDER – MD 80857 19
I
NITIAL OPERATION
Set menu language and country
The window for setting the setup language will appear. Your country's
language is set by default.
`
Confirm your entry by pressing ENTER on the remote control or select
another language using the arrow keys .
You can change the screen language later from
S E T U P > S Y S T E M >
G u i d e L a n g u a g e
.
The second step is to select the country setting. The country setting affects
the search for the TV signal. The default setting is United Kingdom.
`
Select your country and confirm by pressing
ENTER
.
`
To expand the selection go to the last option and press the arrow
key.
You can change the country setting later from
S E T U P > S Y S T E M >
C o u n t r y S e t u p .
Channel scan
As a third step, the device starts an automatic channel scan. Each channel
it finds is displayed briefly on the screen.
`
Wait until the channel scan is complete. This takes a few minutes.
If you use a SAT receiver or
DVB-T box to receive TV programmes it will not find any channels.
You can cancel the scan by pressing
ENTER
.
You can subsequently repeat the channel scan from
S E T U P > V I D E O >
C h a n n e l S c a n .
Setting the date and time
Step four is to set the date and time. This is essential for programming
recordings.
Automatic setting
The device automatically sets the correct time using the channel signal.
`
Simply confirm the
A u t o m a t i c
option by pressing
ENTER
. After a few
seconds a calendar appears with the current date and time.
`
If you want to confirm the calendar use the arrow key to move to the
field and confirm by pressing
ENTER.
Do not use the and
arrow keys as these change the values (cf. next chapter).