YAMADA DVR-9300HX, Manual

Page: 17 / 60

18
I
NITIAL OPERATION
After you have correctly connected up your DVD/HDD recorder and the
power supply has been connected, switch the television set on.
Depending on the connection type, select the video channel (AV) or
another reception channel that matches the connections you have made.
Switch the DVD/HDD recorder on if you have not already done so.
HELLO
and then
install
is displayed on the screen
Operation from device and remote control
You can activate the device's basic playback and recording functions by
pressing the buttons on the device.
The remote control, however, provides numerous advanced functions. In
particular, you can only navigate through the setup menus using the
remote control.
On/off switch
When the device is connected to the mains it is in standby mode. The clock
is displayed.
You switch the device on by pressing the
STANDBY/ON
button on the
device or remote control.
Press
STANDBY
again to switch the device back to standby mode.
When you use the device for the first time the installation menu appears after you have switched
the device on. The channels, language options and date/time settings are made here.
Please note that initial operation is cancelled if you press the OPEN/CLOSE button on the device
or remote control. In this case start the channel search later via the SETUP>VIDEO>Channel Scan
menu as described in Page 45,“Channel Scan”.
In this manual we refer to the remote control buttons. If reference is made to the controls on the
DVD player itself, this will be clearly indicated.