14
An ASSA ABLOY Group brand
P/N AYRD210-INST-FUL Rev B
1. Remove cylinder:
A. Remove outside escutcheon from door.
B. Remove rubber gasket.
C. Remove two screws holding plastic guide
in place.
D. Remove plastic guide.
E. Remove screw with washer holding cylinder in
place (visible after plastic guide is removed).
F. Remove cylinder by pulling towards the
door side of escutcheon.
G. Remove cylinder ring from cylinder.
Note position of ring flange in relation to cylinder.
How to Replace or Install Cylinder
2-5/8" (66.5) For 6 pin cylinders, 1-3/8" thick doors
2-7/8" (73) For 6 pin cylinders, 1-3/4" thick doors ONLY
1-3/16" (30) For 6 pin cylinders, 1-3/8" thick doors
1-7/16" (36.5) For 6 pin cylinders, 1-3/4" thick doors ONLY
CAUTION: The cylinders furnished for use in 1-3/8" doors have a tailpiece that is 1/4" shorter
than the standard cylinders that are furnished for 1-3/4" doors. Trying to install a standard
cylinder in 1-3/8" will DAMAGE the lock body.
F
A
B
E
2. Slide new cylinder into sleeve.
G
Flange
G
D
C
