Yale GDP040-070VX, Operating Manual

Page: 33 / 204

Display Switch Cluster – LCD Screen and
Warning and Indicator Lights
The LCD screen (see Figure 8) shows operator messages
for the different functions. The LCD screen can display mes-
sages on two lines with up to 20 characters per line. Bar
graphs are also shown on the display using solid block char-
acters of varying heights.
The following information is displayed on the LCD screen
when the truck is running:
• Engine coolant temperature (standard)
• Fuel level, diesel and gasoline engines (standard)
The engine coolant temperature is displayed on the top line
and the fuel level is shown on the bottom line. If load weight
and travel speed options are available, press the scroll down
button to display the information for these features. Press the
scroll up button to return to the engine coolant temperature
and fuel level displays. If a fault occurs, the fault number will
be displayed on the top line. The time of day is displayed on
the right side of the top line at all times during the selection
of displayed text. "HYD TEMP/FUNCTION REDUCED" is
displayed when the hydraulic oil temperature is higher or
lower than specified limits.
The warning lights and indicator symbols shown in Figure 8
are on all lift truck models. Depending on the equipment on
the lift truck, the warning and indicator lights on the Display
Switch Cluster will vary and not all the warning and indicator
lights shown in Figure 8 will illuminate. When the warning
lights and indicators are on, the operator will see the appro-
priate symbol. When the warning lights and indicators are off,
the operator will see a black panel. Unless noted in Table 2,
all programmed warning and indicator lights will light up for
two seconds (Start Check) when System Power is turned
ON .
Model Description
31