WARNING
Do not try to move a fork without a lifting device. Each
hook fork for these lift trucks can weigh 45 to 115 kg (99
to 253 lb).
NOTE:
Forks are to be replaced only in sets and not individ-
ually.
2.
A fork can be removed from the carriage for replacement
of the fork or other maintenance. Slide a hook fork to the fork
removal notch on the carriage. See Figure 31 and Fig-
ure 33. Lower the fork onto blocks so that the bottom hook of
the fork moves through the fork removal notch. See Fig-
ure 33. Lower the carriage further so that the top hook of the
fork is disengaged from the top carriage bar. Move the car-
riage away from the fork, or use a lifting device to move the
fork away from the carriage. See Figure 32.
1.
CARRIAGE BARS
2.
HOOK FORK
3.
BLOCKS
Figure 31. Remove a Hook Fork
Maintenance
153
Summary of Contents for GDP040-070VX
Page 81: ...Figure 12 Seat Adjustment Full Suspension Operating Procedures 79 ...
Page 113: ...Figure 17 Kubota 2 5L LPG Engine Maintenance and Lubrication Points Maintenance Schedule 111 ...
Page 169: ...Figure 37 LPG Tank and Bracket Maintenance 167 ...
Page 203: ...Spacer 5 15 4 15 2 15 1 15 11 14 ...
