Table 3. Operator Controls (See Figure 9) (Continued)
Item
No.
Item
Function
12
Direction
Control
Lever
NOTE:
There is a sensor in the seat that actuates an audible buzzer. If the operator
leaves the seat with the key switch
ON
and the lever is not in
NEUTRAL
, the buzzer
will pulse
ON
and
OFF
for 10 seconds.
The Direction Control Lever for the transmission is on the left side of the Display
Switch Cluster. The Direction Control Lever is used on lift trucks without a Foot
Directional Control pedal. The Direction Control Lever has three positions that are
indicated by three green lights on left side of Display Switch Cluster (see Figure 8
and Table 2),
NEUTRAL (N)
, and
REVERSE
. Move the lever to one of the direction
positions for travel. The Direction Control Lever must be in the
NEUTRAL (N)
posi-
tion before the engine can be started. The reverse lights will be on and, if equipped,
reverse alarm will be activated when the lever is placed in the
REVERSE
position.
Model Description
54
Summary of Contents for GDP040-070VX
Page 81: ...Figure 12 Seat Adjustment Full Suspension Operating Procedures 79 ...
Page 113: ...Figure 17 Kubota 2 5L LPG Engine Maintenance and Lubrication Points Maintenance Schedule 111 ...
Page 169: ...Figure 37 LPG Tank and Bracket Maintenance 167 ...
Page 203: ...Spacer 5 15 4 15 2 15 1 15 11 14 ...
