1033402A-3/18
Install
Red knob
• Choose access from
passenger or driver side.
• Red knob should face you
when the Raptor Aero is
attached to wheel tray.
jAwS
guide
Plug
Red knob
thReAded
Plug
• Place the GUIDE PLUG into the
hole on one side of the jaws.
• Slide the red knob‘s bolt threads
through the guide plug.
guide Plug
• Insert the Threaded Plug into
the other hole.
• Place spring between guide
plug and threaded plug.
• Slide knob through spring
and into threaded plug.
thReAded
Plug
turn the red knob
clockwise to engage
the threaded plug.
SPRing
Tighten knob completely until
threaded end is exposed.
Slide the “E”clip into groove on end.
A coin or a key may
provide added leverage.
Open red knob
completely.
SKS
®
Lock Cores are optional.
to install SkS® lock cores, refer to lock
instructions.
note: if not using lock,
leave plug in place.
Round oR squaRe baRs: Install the snaparounds.
—do not inStall Universal MightyMounts on round or square bars!
Remove the tabs with
scissors or pliers.
Attach 2 SnapArounds
on the front crossbar,
and 1 on the rear
crossbar.
JaW assemblY (Round, square, or factory crossbars)
square bars onlY :
round and square bars :
Loosen the tabs by
bending them repeatedly.
