– B
i c
y c
l e
–
CRADLES HAVE A FRONT AND BACK.
Cradle with
YAKIMA logo
should go on
last, with
“YAKIMA”
facing out.
The smooth
depression on
right front side
must face
TOWARD you.
INSERT CABLE INTO MAST.
Compress the tabs to
install the locking cap.
The tabs on the locking cap
should nest into the holes in
the mast end.
LOCKING CAP POSITION:
Move the outside
cradle completely
forward until it
stops at the metal
rivet.
POSITION END CRADLE.
Make sure the open
part of the locking
cap faces down.
SECURE THE CRADLES TO THE MAST.
Insert the bolt and washer
(right to left) into the
rounded depression on the
underside of the cradle.
TIGHTEN EACH CRADLE
CAREFULLY.
POSITIONING THE CRADLES: You may want to adjust the
cradles once the bikes are loaded.
INSTALL LOCK PIN AND “E” CLIP.
Maneuver the pin into the hole,
bypassing the internal cable.
Attach nut.
Use a flathead screwdriver.
LOAD YOUR BIKE.
ATTACH CRADLE
STRAPS.
Nest bike’s top
tube into first
cradle.
Load bikes in opposite
directions.
You may want to loosen
cradles and adjust bike spacing.
Don’t forget to tighten
the bolts again!
Be sure strap is
hooked onto cradle.
Your product includes a
stop-rivet.
Flex cradles and push over
stop-rivet on mast.
