– B
– B
i c y
c l e
ATTACH STRAP TO HOOK.
ATTACH STABILIZING BAR.
REMOVE THE PLUGS
IN THE MAST.
Pry off the plugs
using a flat tool.
Secure with washers, nuts
and bolts.
Attach hook to end of strap, threading
IN and OUT as noted on hook.
Thread strap through loop
on bar.
ATTACH HOOK
TO WHEEL.
Repeat Step 22 and 23 for other end of strap.
Pull straps tight with both hands.
FOR FOUR BIKES:
Two straps are used in the bar loop
farthest from the vehicle.
Use a wrench to tighten.
Straps can be
routed between
cables and tube.
Be sure straps are secured
onto cradle hooks.
HOOK STRAPS OVER BIKE’S TUBE.
CHECK CRADLES!
Grab close to bar with
both hands.
TIGHTEN IF THERE IS
ANY MOVEMENT.
NOTE: With last bike
locked, all other bikes
are secure.
LOCK YOUR BIKES TO THE CARRIER.
Attach the cable-lock over the bike tube
and onto the pin in the mast. LOCK IT.
CONTINUE TO BACK PAGE FOR IMPORTANT OPERATING PROCEDURES...
