![background image](http://html1.mh-extra.com/html/yaesu/zcut-3ex/zcut-3ex_instruction-manual_3094763005.webp)
Do not insert any foreign material from the tape outlet.
This can cause failure of the machine.
An operator’s presence is required whenever the machine is in operation.
Turn the machine off and unplug the cord when the operator is not present.
Failure to observe this can result in injury.
Do not cut or damage the power cord.
A cut or damaged cord can result in electric shock, a short circuit or possible
fire hazard.
Make sure the cord is connected properly to the electrical outlet as well as the
receptacle on the back of the machine.
A loose connection can result in high heat or fire.
Do not use the machine in areas where moisture is present, high temperature
exist or a high content of dust or dirt is present.
This can lead to failure of the machine.
Always install and operate the machine on a flat, stable surface.
Dropping the machine may cause injury to the operator or failure of the machine.
Use the machine only in the upright position.
Using the machine in the inclined state may cause failure of the machine.
Please take out the tape every time after finished using the machine.
Leaving the tape inside the machine may cause failure of the machine.
5
CAUTION
Summary of Contents for ZCUT-3EX
Page 1: ...INSTRUCTION MANUAL...