Yaesu Wires-X, Instruction Manual

Page: 27 / 39

26
Using the Portable HRI Mode
When communicating via the Internet in “
Portable HRI Mode
”, refer to “
Adjusting Audio Level in the Access Point
(Portable HRI Mode) ” (page 30) or “ Adjusting Audio Level in the Direct Operation (Portable HRI Mode) ” (page 32)
and adjust the audio level of the computer.
Connecting the transceiver and the PC
Refer to “ Communicating with digital or analog FM mode (Portable HRI Mode) ” (page 10) and connect the
transceiver to the PC.
Starting the WIRES-X software
1. Double click the [ Wires-X ] icon on the desktop of the computer screen.
The main screen of WIRES-X software is displayed.
For details on the main screen, refer to “ WIRES-X Software Main Screen ” (page 28).
Starting the transceiver in special mode
1. Press and hold the [ X ] key and the [ BACK ] key simultaneously, while turning the radio ON .
2. Press the [ A/B ] key to select “ Access Point ” or “ Direct Operation ”.
Depending on the set operation mode, it is displayed on the frequency display as follows.
Access Point: “WIRES-X NODE”
Direct Operation: “DIRECT”
To return the transceiver to the normal mode, repeat procedure 1 in the above.
The portable station transceiver cannot use the News Station feature or the GM feature.
Connecting a node or a room by operating the WIRES-X software on the PC
On the WIRES-X software main screen, may be easily connect to the desired room or node station.
1.
Click the Digital Node or Digital Room to connect.
2. Right-click on the selected Node or Room.
The command list is displayed.
3. Click the [ connect ].
When a connection is successfully established, the
IDLE indicator “ ” will change to the NET
indicator “ ”, and the User ID of the connected
Node station or Room “ ” is displayed.
“ Connected " will appear on the LCD of the portable
node station's transceiver or the transceiver accessing
the portable node station in WIRES-X mode.
⿟ Room Pop-up Window
When connecting to the room a window will pop up displaying the operational status of the room. For details, refer
to “ Room pop-up window ” (page 29).