Yaesu Wires-X Instruction Manual Download

Page: 18 / 39

Function

Key or Dial

TX/BUSY LED turn OFF/ON

V/M key (Press and hold)

Squelch OFF

MONI key (While MONI key is pressed)

Adjusts the squelch level

SQL key and DIAL knob

Enters the Set mode*

DISP key (Press and hold)

Enters the BACKTRACK screen

DISP key

Registering to Memory Channel

[F MW] (Touch and hold)

Displays the Function Menu Screen

[F MW]

Selects the Transmission Power Level

[TX PWR] in the Function Menu Screen

Recalls the “HOME” channel

[HOME] in the Function Menu Screen

Reverses the transmit and receive frequencies

[REV] in the Function Menu Screen

Switches Busy detection between “Noise squelch” and

“DG-ID number match”.

A/B key (Press and hold)

* Some setting items in the set mode are automatically set for the Portable Digital Node function, so these

settings cannot be changed.

2. Setting the transmit and receive DG-ID number.

This procedure is unnecessary if the transceiver is already set to the required transmit and receive DG-ID

number.

Since the transmit and receive DG-ID number is “TX: 00” and “RX: 00”, it operates as an open node and is

accessible from all transceivers using C4FM digital mode.

When using a portable node station to be accessed only by the specific members, set the transmit and receive

DG-ID to a number other than “00”.

• In the Access Point, if the receive DG-ID is set to other “00”, set the

transmit

DG-ID number to the same DG-ID

number. Note that setting to a different number will not work properly.

• When setting the receive DG-ID number to “00” and then setting the transmission DG-ID number to anything other

than “00”, the audio of all received C4FM digital stations will be heard on the speaker, but for the transmission DG-

ID Only the matched communication is relayed to the opposite station on the Internet.

• The DG-ID Subcode cannot be used or set in Portable Digital Node mode.

1. Press and hold the [

] key.

The DG-ID SETUP screen is displayed on the LCD.

2. Press the [

] key, then rotate the

DIAL

knob to set the transmit DG-ID

number (DG-ID TX).

While setting the DG-ID number, press and hold the [

DISP

] key will set the

transmit and the receive DG-ID numbers to “00”.

Summary of Contents for Wires-X








































Search results

Summary of Contents for Wires-X

Reviews:

Related manuals for Wires-X

Brands by name

Popular brands

Yaesu Wires-X, Instruction Manual

Search results

Summary of Contents for Wires-X

Reviews:

Related manuals for Wires-X

Brands by name

Popular brands