manualshive.com logo in svg

Yaesu Wires-X, Instruction Manual

Share
Download
Yaesu Wires-X Instruction Manual Download Page 21

20

Connecting to a node or a room on the Internet

The Portable Digital Node Mode may be not connected to anything other than a Digital Room or a Digital Node. 

In order to connect with the analog node station, it is necessary to use the 

Portable HRI Mode

 (page 26).

Connection to an Internet Digital Node or a Digital Room may be made in the following two ways:

（

1

）

  Connecting to a node or a room by operating the WIRES-X software on the PC

（

2

）

  Connecting to a node or a room by operating the transceiver of the portable node

（

1

）

  Connecting a node or a room by operating the WIRES-X software on the PC

On the WIRES-X software main screen, you can easily connect to the desired room or node station.
1.

 

Click the 

Digital Node

 or 

Digital Room

 to connect.

• 

Icon of a digital room or a digital node

 :  Digital Open room (Only the Digital Nodes 

may be connected)

 :  Digital Node Station
 :  Portable Digital Node Station

2.

 

Right-click on the selected 

Digital Node

 or 

Digital 

Room

.

 

The command list is displayed.

3.

 

Click the [

connect

].

 

When a connection is successfully established, the 

IDLE indicator “

” will change to the NET 

indicator “

”, and the User ID of the connected 

Node station or Room “

” is displayed.

 

“

Connected

” will appear on the LCD of the portable 

node station's transceiver or the transceiver accessing 

the portable node station in WIRES-X mode.

Room Pop-up Window

When connecting to the room a window will pop up displaying the operational status of the room. For details, refer 

to “

Room pop-up window

” (page 29).

(2)  Connecting a node or a room by operating the transceiver of the portable node

There are five ways to connect to a digital room or a digital node on the Internet.

①

 Searching from the node & room lists

  

(

page 20

)

②

 Search the node ID or the room

  

(

page 21

)

③

 Select the node or the rooms registered in the category list

  

(

page 22

)

④

 Connecting to the node or room you have most recently connected

  

(

page 23

)

⑤

 Enter the DTMF ID number (5 digits) of the node or the room 

 

(

page 23

)

May also be connected to a node or a room by operating another C4FM digital transceiver accessing the portable 

node station with the frequency and the WIRES-X DG-ID number together. For details, refer to the 

operating 

manual <WIRES-X edition>

 of each transceiver.

①

 Searching from the node & room lists

1

.  Touch [

SEARCH & DIRECT

].

 

Displays the category list.

Summary of Contents for Wires-X








































Reviews:

No comments

Brands by name

Popular brands

Load more brands