Yaesu Wires-X, Instruction Manual

Page: 15 / 39

14
Transceiver settings (Access Point only)
When using “ Access Point ” of Portable HRI Mode, set the operating frequency and parameters etc. of the transceiver
by using the following procedure:
It is not necessary to make these settings when using “
Direct Operation ”.
When using “ Access Point ” of Portable Digital Node Mode, only the “ Hide frequency settings ” item can be set using the
following procedure. When the transceiver is connected and operation of the “ Node Mode ” is started, the other items settings
are transferred from the transceiver and can only be confirmed.
1. From the “ File ” menu, click “ Transceiver ”.
The “ Transceiver ” window will appear.
2. Set the operating frequency of the Portable Digital Node Station.
Frequency: Enter the operating frequency.
Narrow
Deviation: Select if using Narrow deviation operation. （ default: Unchecked ）
DG-ID:
Select the DG-ID (Digital Group ID) number 00 to 99
(
default setting: 00
)
When the DG-ID number is set to “ 00 ”, the node becomes an open node. The subcode on the right
can be set from “ 00 ” to “ 26 ”.
When DG-ID number is set to “
00
” and subcode is set to “
00
”, relay C4FM digital signals of all DG-
ID numbers.
When DG-ID number is set to “ 00 ” and subcode is set from “ 01 ” to “ 26 ”, C4FM digital signals without
the matching subcode will not be relayed. The C4FM digital transceiver accessing the WIRES-X
DG-ID “ AUTO ” node station is automatically set to the same subcode and can communicate while
accessing it.
• By setting the DG-ID number to “00”, the station becomes an open node station, and can be
connected from all transceivers with the WIRES-X DG-ID setting “AUTO”. When using a node
station in a restricted group, set the DG-ID to a number “01” to “99”, and then set all the group
transceivers to the same DG-ID number.
• The DG-ID Subcode cannot be used or set in Portable Digital Node mode.