Yaesu FTM-400XDR/DE Operating Manual Download Page 209

Page: 209 / 220

209

Appendix

Maintenance

Care and maintenance

Turn the transceiver OFF before wiping away any dust and stains on the radio using

a dry and soft cloth. For stubborn stains, slightly moisten a soft cloth and wring it hard

before using it to wipe away the stains.

Caution

Never use washing detergents and organic solvents (thinner, benzene etc.). This may

result in the paint peeling off or the cover being damaged.

Replacing the fuse

Use ONLY the correct rating (15 A) replacement fuse in the DC cable fuse holder.

Caution

When replacing the fuse, disconnect the power supply cable from the radio and from the

external DC power supply.

●

Replacing the fuse of the DC power supply cable

Prepare a new fuse

Use a fuse with a rating of 15 A.

Caution

Never use a fuse that is not of the specified rating.

Open the fuse holder as shown in the diagram on

the right

➀

➁

Remove the broken fuse

Attach the new fuse

Close the fuse holder

European version

Summary of Contents for FTM-400XDR/DE





























































































































































































































Search results

Summary of Contents for FTM-400XDR/DE

Reviews:

Related manuals for FTM-400XDR/DE

Brands by name

Popular brands

Yaesu FTM-400XDR/DE, Operating Manual

Search results

Summary of Contents for FTM-400XDR/DE

Reviews:

Related manuals for FTM-400XDR/DE

Brands by name

Popular brands