FTM-350 S
ERIES
O
PERATING
M
ANUAL
49
The
FTM-350
Series Transceiver includes a convenient “Clone” feature, which allows the
memory and configuration data from one transceiver to be transferred to another
FTM-350
Series Transceiver. This can be particularly useful when configuring a number of transceiv-
ers for a public service operation. Here is the procedure for Cloning one radio’s data to
another:
1.
Turn both radios “off”.
2.
Connect the optional
CT-135
Clone Cable between the
DATA
jacks of the two radios.
3.
Turn the radio on while pressing and holding the key which is located to the left of the
[
POWER
] switch to enter the “Special Function” mode. Do this for both radios (the
order of switch-on does not matter).
4.
On the “Destination” radio, rotate the
left side
[
DIAL
] knob to select function menu
item “
1 CLONE RX
”, then press the
left side
[
DIAL
] knob
twice
.
5.
On the “Source” radio, rotate the
left side
[
DIAL
] knob to select function menu item
“
2 CLONE TX
”, then press the
left side
[
DIAL
] knob. The data from this radio will be
transferred to the other radio.
6.
If there is a problem during the cloning process, “ERROR” will be displayed. Check
your cable connections and battery voltage, and try again.
7.
If the data transfer is successful, the “Destination” radio displays “
RECEIVED....
”
then turns “off” automatically and turns “on” again.
8.
Press the [
DIAL
] key of the “Source” radio. The “Source” radio will now automatically
turn “off” and turn back “on” again.
9.
Turn both radios “off” and disconnect the Clone Cable.
Can not perform the cloning operation between the FTM-350AR and FTM-350AE.
C
LONING
Summary of Contents for FTM-350 - APRS
Page 29: ...FTM 350 SERIES OPERATING MANUAL 27 NOTE...
Page 33: ...FTM 350 SERIES OPERATING MANUAL 31 NOTE...
Page 59: ......
