Yaesu FTM-350 - APRS, Operating Manual

Page: 23 / 60

FTM-350 S
ERIES
O
PERATING
M
ANUAL
21
I
NTERNET
C
ONNECTION
F
EATURE
FRG
(
“F
RIENDLY
R
ADIO
G
ROUP
”) M
ODE
1. Press the [ SET
] key to enter the Set Mode, choose the “
SIGNALING
” group, choose
the “ J02 DTMF MEMORY ” item, and then choose “ FRG ”. Store the access code of
the Internet link to the DTMF memory register. See page 45.
2. Then set item “ J06 WiRES ” in the “ SIGNALING ” group to “ FRG ”. See page 46.
3. Press the [ ESC
] key three times to exit from the Set Mode and activate the Internet
Connection feature in the “
FRG
” mode. The “ ” icon will appear on the display.
4. To access an FRG node, perform the following procedures:
1) Press the [
WiRES
] key to access the Set Mode.
2) Rotate the left side [ DIAL
] knob to select the WiRES memory register correspond-
ing to the WiRES™ repeater you wish to establish an internet link with.
3) Press the [ ESC
] key to exit from the Set Mode.
4) Press the [ ] key (located at the left edge of the [ SMART FUNCTION
] key while
transmitting) while pressing the PTT switch to transmit the access code.
5. To disable the Internet Connection feature, select the “ OFF ” selection in the Set Mode
item “ J06 WiRES ”.