Yaesu FTM-350 - APRS, Operating Manual

Page: 14 / 60

FTM-350 S
ERIES
O
PERATING
M
ANUAL
12
B
AND
S
COPE
O
PERATION
G
ENERAL
The Band Scope permits viewing operating activity on channels above and below the cur-
rent operating channel, in the VFO mode.
Important Note : The Band Scope feature will not activate while the radio is in Dual Band
receive with the “Mono” band mode.
1
Press the “Main” band [
DIAL
] knob to activate the Band Scope.
2
Press the [ BW
] key to toggle the visible bandwidth to “±22 channels” and “±50 chan-
nels”.
3
Press the [ ATT
] key to reduce the receiving signal by approximately 10 dB, if desired
(except the AM and FM Broadcast bands).
4
Press the [ STOP
] key to stop the sweep of the Band Scope temporarily, if desired.
Press the [ START
] key to start the sweep of the Band Scope again.
5
Press the “main” band [ DIAL
] knob to disable the Band Scope and return to normal
operation.
2
1
5
3 4