Yaesu FTM-300DR, Operating Manual

Page: 7 / 80

5
ENTER FREQUENCY (VFO mode)
ENTER MEMORY CH (MEMORY mode)
ENTER FREQUENCY
Rotate the DIAL knob
to select a number then
press the DIAL knob. If
you press and hold the
DIAL knob, everything
after the current digit is
entered as “0”.
ENTER MEMORY CH
Rotate the DIAL knob
to select the memory
channel number, then
press the DIAL knob.
Press and hold the DIAL
knob to confirm and
complete the memory
entry.
FUNCTION
REV
Reverse the transmit and receive
frequencies temporarily.
DTMF
Select a registered DTMF memory
channel.
DTMF
MEMORY
Register DTMF memory (up to 16
digits).
LOG
LIST
Display the Log List screen.
TXPWR
Select the transmit power.
HI → LO → MD → HI ...
SQ-TYP
Select a squelch type.
TN : CTCSS tone
TSQ : CTCSS tone squelch
RTN : Reverse tone squelch
DCS : Digital code squelch
PR : No-communication Squelch
PAG : PAGER (EPCS)
DC
*
: Transmits the DCS
T-D
*
: TX: CTCSS tone
RX Digital Code Squelch
D-T
*
: TX: Digital Code Squelch
RX: CTCSS tone squelch
OFF : Normal squelch operation
*The options in the parentheses are
available when the SQL expansion is
ON.
TONE/CODE
Setting the CTCSS tone or the DCS
code.
REC/STOP
Start or stop recording the received
audio on the microSD card.
APRS FUNCTION
STN
LIST
Displays the APRS station list screen.
BEACON
Set “ON” / “OFF” for automatic
transmission of APRS beacon.
MSG
LIST
Displays the APRS message list
screen.
BCN-TX Transmit APRS beacon.
FVS-2
(Only available when the optional voice guide unit FVS-2
is installed)
M.REC
Start recording the received audio to
FVS-2.
TRACK
Select the track number recorded on
FVS-2.
PLAY
Start replaying the recorded audio on
FVS-2.
STOP Stop recording / replay
CLEAR Deletes all recorded contents of FVS-2.
VOICE
GUIDE
The frequency of the operating band will
be announced.
V/M(MW) key
Each key press switches between VFO mode and
memory mode.
When a memory channel is recalled, the memory
channel number is displayed, such as “M-ALL 001”.
The last operated memory channel is recalled.
Press and hold the key to display the memory
channel list screen.
Writing to memory or recalling and editing of stored
memory channel.
BAND key
VFO mode
Each key press switches the operating frequency
band.
Band Selectable Frequency Range
AIR 108MHz - 137MHz
144MHz 137MHz - 174MHz
VHF 174MHz - 400MHz
430MHz 400MHz - 480MHz
UHF 480MHz - 999.99MHz
Memory mode
Each time the key is pressed (except M-GRP), only
memory channels of the same frequency band are
automatically recalled as a group as shown below.
M-ALL (All memory channels)
M-AIR (AIR band memory channels)
M-VHF (144MHz band memory channel)
M-UHF (430MHz band memory channel)
M-GEN (VHF and UHF band memory channels)
M-GRP (Memory channels registered in advance
regardless of the frequency band)
Bands that have not been stored are not displayed.
A/B key
Select the operation band.
Each press key between A band (frequency at the
top of the screen) and B band (frequency at the
bottom of the screen).
• The operating band is white and the other band
is gray.