53
Using the Voice Recorder
With the voice recording function, the received audio of the other station, and/or the
transmit audio of this unit is recorded on the MicroSD memory card. The recorded file
can be played back with the
FTM-300DR/DE
or the MicroSD memory card can be taken
out and used on a PC. Once recording is started, it continues until recording is stopped,
or the capacity of the MicroSD card is full.
z
About the file
•
The audio file is saved in the “
VOICE
” folder on the MicroSD card.
•
The file is a Wave sound format (extension: wav).
•
The file name is “YYYYMMDDmmhhss.wav” (YYYY: year, MM: month, DD: day,
hh: hour, mm: minute, ss: second) depending on the date and time when the re-
cording started.
•
When using the MicroSD memory card for the first time, please refer to “Formatting a
MicroSD Memory Card” on page 20 for formatting.
•
Since the date and time information is used for the voice recording function names and file
timestamps when recording, it is recommended to set the date and time by following the
procedure below:
[F(SETUP)] key → [CONFIG] → [1 DATE&TIME ADJUST]
Recording the receive audio
1. Press the [
F(SETUP)
] key, then rotate the
DIAL
knob
to select [
FUNCTION
].
2. Press the
DIAL
knob.
3. Rotate the
DIAL
knob to select [
REC
].
4. Press the
DIAL
knob.
•
“
REC
” is displayed, and the recording function starts.
•
“II” is displayed at the top of the LCD and the unit
enters the recording standby mode. When a signal is
received, recording starts automatically.
•
During recording, the “II” indication changes to “ ”.
•
With the factory default settings, the “
A-band
” re-
ceived audio is recorded.
•
Recording will be paused about 3 seconds after the
squelch of the band that is recording is closed. Re-
cording will resume when a signal is received.
•
The band or bands to be recorded, and whether or
not to include the transmit audio in the recording
may be selected in the set mode.
Recording is stopped when the transceiver is turned OFF.
