38
M-GRP allows you to create groups of
memory channels regardless of frequency.
z
Registering memory in M-GRP (memory group)
1. Press the [
F(SETUP)
] key.
2. Rotate the
DIAL
knob to select [
ENTER FREQUENCY
] or [
MEMORY CH
], then
press the
DIAL
knob.
3. Rotate the
DIAL
knob to select [
MEMORY CH LIST
], then press the
DIAL
knob.
The memory channel list appears.
4. Rotate the
DIAL
knob to select the memory channel you want to register in
M-GRP
.
5. Press and hold the [
BAND
] key to register that memory channel in
M-GRP
.
•
The memory channel numbers registered in
M-GRP
are displayed in blue.
•
To register another channel, repeat steps 1 and 2.
•
To delete the registration, select the memory channel then press and hold the
[
BAND
] key to cancel the registration.
6. Press the [
DISP
] key to complete registration.
z
Deleting memory from M-GRP (memory group)
To delete a memory channel form M-GRP, perform procedures 1 to 6 as above; proceed
to step 4 and select the memory channel to delete. In step 5, press and hold the [BAND]
key to cancel the registration.
Multi Channel Standby (MCS) Function
Convenient function to automatically watch multiple memory channels registered in the
MAG
function group.
Example: Operate MCS function with M-GRP
1. In the memory mode, press the [
BAND
] key to select
M-GRP
.
2. Press and hold the [
BAND
] key.
•
Watch all memory channels registered in
M-GRP
.
•
When the
MCS
is active, “
MCS
” appears on the display.
•
When a signal is received, watch stops on the received memory channel and the
audio can be heard.
•
Watch stops on that channel until 5 seconds after reception is completed, so you
can communicate.
•
When there is no transmit or receive operation for about 5 seconds, the watch of
the memory channels registered in
M-GRP
is started again.
3. To cancel the
MCS
function, press the [
BAND
] key.
