21
Operation
Turning the Transceiver ON
1. Press and hold the Power (Lock) switch to turn the
transceiver
ON
.
z
Turning the transceiver OFF
Press and hold the Power (Lock) switch again to turn
the transceiver OFF.
z
Inputting the call sign
1. The first time the transceiver is turned ON after it is
purchased; input your own call sign.
2. Press the
DIAL
knob to proceed to the call sign input
screen.
•
When the transceiver is subsequently turned ON,
the opening screen appears followed by the frequen-
cy screen.
•
The input call sign may be changed from the Setup
Menu [CALLSIGN].
3. Rotate the
DIAL
knob to select a character and then
press the
DIAL
knob.
Please enter
Your CALLSIGN
(Max 10 letters)
Press the Dial knob
: Moves the cursor to the right.
: Moves the cursor to the left.
: Changes the numeric and symbol input.
: Deletes the character to left of the cursor.
Up to 10 characters (letters, numbers, and a hyphen) can be entered.
4. Repeat step 3 to input the remaining call sign characters.
5. Press and hold the
DIAL
knob to conclude inputting.
Normal operation (VFO Mode) screen will be displayed.
