25
Selecting the Communication Mode
z
Using AMS (Automatic Mode Select) function
The FTM-300DR/DE transceiver is equipped with
the AMS (Automatic Mode Select) function which
automatically selects the communication mode
corresponding to the received signal.
To utilize the AMS function, touch [
D X
] repeatedly to
display “
”*, “
”* or “
”* on the display. After
receiving the signal, “FM” of “ ” will change to indicate
the mode of the received signal.
*The display differs depending on the received signal.
z
Setting the transmit mode when using the AMS function
The AMS function will automatically set the receiver to the mode of the received signal,
but the transmit mode may be fixed regardless of the received mode.
1. Press and hold the [
F(SETUP)
] key.
2. Rotate the
DIAL
knob to select [
TX/RX
], then press
the
DIAL
knob.
3. Rotate the
DIAL
knob to select [
2 DIGITAL
], then
press the
DIAL
knob.
4. Rotate the
DIAL
knob to select [
1 AMS TX MODE
],
then press the
DIAL
knob.
5. Press the
DIAL
knob to select to the desired transmit
mode as follows:
*The display differs depending on the transmit
mode.
Transmit Mode
Receive and Transmit
AUTO
(default)
Receive: Automatically selects the receive mode corresponding to
the received signal.
Transmit: Automatically transmits in the communication mode
selected by the AMS function.
TX FM FIXED
Receive: Automatically selects the receive mode corresponding to
the received signal.
Transmit: Always transmits in the analog FM mode.
TX DN FIXED
(TX DIGITAL)
Receive: Automatically selects the receive mode corresponding to
the received signal.
Transmit׃
Always transmits in the DN mode.