24
z
The numeric keys on microphone
Press the numeric keys “0” to “9” to enter the frequency.
Example: To input 145.520 MHz
[1] → [4] → [5] → [5] → [2]
Example: To input 430.000 MHz
[4] → [3] → [Press and hold any numeric key]
While entering a frequency using the numeric keys, the
entry may be canceled by pressing the PTT switch or the
[
BACK
] key.
Changing the Frequency Step
The
DIAL
knob rotation frequency step may be changed. Normally, use the factory
default setting of "
AUTO
".
1. Press and hold the [
F(SETUP)
] key.
2. Rotate the
DIAL
knob to select [
CONFIG
], then press
the
DIAL
knob.
3. Rotate the
DIAL
knob to select [
7 STEP
], then press
the
DIAL
knob.
4. Rotate the
DIAL
knob to set the frequency step.
5. Press the [
DISP
] key to complete the setting.
•
The default setting, of the frequency step is set to “AUTO”, which automatically provides a
suitable frequency step according to the frequency band.
•
The frequency steps that can be selected depend on the frequency band.
