45
Setting the Receive Operation When Scanning Stops
1. Press and hold the [
F(SETUP)
] key.
2. Rotate the
DIAL
knob to select [
SCAN
], then press the
DIAL
knob.
3. Press the
DIAL
knob to select the hold time after the
scan is paused:
•
1 sec / 3 sec / 5 sec
The signal is received for a specified period of time,
and then scanning resumes.
•
BUSY
The signal is received until the signal fades out. Two seconds after the signal
fades out, scanning resumes.
•
HOLD
Scanning stops and tuning remains on the current receive frequency (Scanning
does not resume).
4. Press the [
DISP
] key to save the new setting and exit to normal operation.
The above setting is common for all scanning operation.
Skip Memory Channels
Each memory channel can be set to be skipped during memory scan.
1. Press and hold the [
V/M(MW)
] key.
The memory channel list appears.
The memory channel list can also be displayed by the following operations.
1. press the [
F(SETUP)
] key
select [
ENTER FREQUENCY
] or [
MEMORY CH
], then
press the
DIAL
knob.
2. Rotate the
DIAL
knob to select [
MEMORY CH LIST
].
3. Press the
DIAL
knob to show the memory channel list.
4. Rotate the
DIAL
knob to select the memory channel number that you do not want to
scan, and press the
DIAL
knob.
5. Rotate the
DIAL
knob to select [
EDIT
], then press the
DIAL
knob.
6. Rotate the
DIAL
knob to select [
SCAN
].
7. Rotate the
DIAL
knob to select [
NO
].
8. Rotate the
DIAL
knob to select [
OK
], then press the
DIAL
knob.
9. When the confirmation screen is displayed, press the
DIAL
knob.
10. Press the [
DISP
] key or the
PTT
switch to complete the setting.
When the memory channel set as the skip memory is called, the “ ” icon is dis-
played.
