Yaesu FTDX5000 CAT BOOK, Operating Manual

Page: 9 / 148

Page 7 FT
DX
5000 O
PERATING
M
ANUAL
R
ESETTING THE
M
ICROPROCESSOR
R
ESETTING
M
EMORIES
(
O
NLY
)
Use this procedure to reset (clear out) the previously stored
Memory channels, without affecting any configuration
changes you may have made to the Menu settings.
1. Press the front panel [ POWER
] switch to turn the trans-
ceiver off.
2. Press and hold in the [
A
X X
X X X
M
] button; while holding it
in, press and hold in the front panel [ POWER
] switch
to turn the transceiver on. Once the transceiver comes
on, release the buttons.
M
ENU
R
ESETTING
Use this procedure to restore the Menu settings to their
factory defaults, without affecting the memories you have
programmed.
1. Press the front panel [ POWER
] switch to turn the trans-
ceiver off.
2. Press and hold in the [ MENU
] button; while holding it
in, press and hold in the front panel [ POWER
] switch
to turn the transceiver on. Once the transceiver comes
on, release the buttons.
F
ULL
R
ESET
Use this procedure to restore all Menu and Memory set-
tings to their original factory defaults. All Memories will
be cleared out by this procedure.
1. Press the front panel [
POWER
] switch to turn the trans-
ceiver off.
2. Press and hold in the [
FAST
] and [
LOCK
] buttons;
while holding them in, press and hold in the front panel
[
POWER
] switch to turn the transceiver on. Once the
transceiver comes on, release the switches.
B
EFORE
Y
OU
B
EGIN
[POWER] Switch [A
X
M] Button
[POWER] Switch [MENU] Button
[POWER] Switch [FAST] / [LOCK] Button