Yaesu FTA-850L Operating Manual Download

Page: 69 / 96

Delete waypoints

You can delete waypoints registered while editing

a route.

1. Press the [▲] / [▼] keys

to select the waypoint you

want to delete, and then

press the [

ENT

] key.

Note:

The determined starting

point and destination can-

not be deleted.

2. Press the [▲] / [▼] keys to

select “

Delete

” and then

press the [

ENT

] key.

Waypoints will be deleted.

Edit the stored route

You can edit the stored route in Memory Book in the

setup menu.

1. Press and hold the [

MENU

] key to display the

SETUP menu screen.

2. Select “

Memory Book

” on

the screen by pressing the

[

▲

] or [

▼

] key, and then

press the [

ENT

] key.

3. Press the [▲] / [▼] keys

to select “

New

”, and then

press the [

ENT

] key.

4. Press the [▲] / [▼] keys to

select the memory group in

which the route you want to

edit is saved, and press the

[

ENT

] key.

FLAG

Summary of Contents for FTA-850L

































































































Search results

Summary of Contents for FTA-850L

Reviews:

Related manuals for FTA-850L

Brands by name

Popular brands

Yaesu FTA-850L, Operating Manual

Search results

Summary of Contents for FTA-850L

Reviews:

Related manuals for FTA-850L

Brands by name

Popular brands