Yaesu FTA-850L, Operating Manual

Page: 58 / 96

56
The frequency of the last
weather channel, however, will
not be displayed until the scan-
ner encounters the weather
alert signal.
Selecting Scanning Band
“ALL BAND” scans both the COM and NAV bands
between 108.000MHz and 136.9916MHz. “COM
BAND” scans the COM band between 118.000MHz
and 136.9916MHz. “NAV BAND” scans the NAV band
between 108.000MHz and 117.975MHz.
1. Press and hold the [ MENU
] key to display the
SETUP menu screen.
2. Select “ COMM Setup ” on the screen by pressing
the [ ▲
] or [
▼
] key, and then press the [
ENT
] key.
3. Select “ Scan Band ” on the
screen by pressing the [ ▲
]
or [ ▼
] key, and then press
the [ ENT
] key.
4. Select the desired scan op-
eration by pressing the [ ▲
]
or [ ▼
] key, and then press
the [ ENT
] key.
ALL Band (108 - 137 MHz)
/
COMM Band (118 - 137 MHz)
/
NAVI Band (108 - 118 MHz)
The setting will be determined and the display will
return to the COMM Setup menu.
Scanning the Memory Channels
Among the memory, you may scan only those on
which you want to see if a signal exists.
z
Marking the channels
1. Press and hold the [ MENU
] key to display the
SETUP menu screen.
2. Select “ Memory Book ” on the screen by pressing
the [ ▲
] or [
▼
] key, and then press the [
ENT
] key.
3. Select “ EDIT ” by pressing the [ ▲
] or [
▼
] key, and
then press the [ ENT
] key.
4. Press the [ ▲
] or [
▼
] key to select the group includ-
ing the entry you want to edit, then press the [ ENT
]
key.
5. Press the [ ▲
] or [
▼
] key to select the entry you
want to edit, then press the [ ENT
] key.