65
Select a destination
5. Press the [▲] / [▼] keys to
select “
Destination:
” and
press the [
ENT
] key.
6. Press the [▲] / [▼] keys to
select the group in which
the desired memory is
saved, and then press the
[
ENT
] key.
FLAG
7. Press the [▲] / [▼] keys to
select waypoint, and then
press the [
ENT
] key.
•
The memory where the
route is stored is not
displayed.
•
Only the memory where
the latitude / longitude
information is stored is
displayed.
8. The set destination (e.g.:
KLAX-APP) is displayed.
Add waypoints
9. To add a waypoint, se-
lect the waypoint one line
above in the order you
want to add and press the
[
ENT
] key.
If you do not want to add
a stop, proceed to “Set the
departure point” (step 13).
Note:
Waypoints cannot be added if
the departure point is selected.
10. Press the [▲] / [▼] keys to
select “
Add
” and press the
[
ENT
] key.
11. Add waypoints in the same
way as steps 6 and 7.
