31
DD (Dual Frequency Display) mode operation
On the active channel, you can perform most of the
usual operations such as receiving and transmitting,
changing the frequency, and adjusting the volume. You
can also select the active channel with up and down
keys, switch the mode, and switch the memory group.
z
Selecting the active channel
Press the [▲] key to make the top channel the active channel
.
Press the [▼] key to make the lower channel the active channel
.
z
Selecting the mode
Each time you press the [
ENT
] key, the active channel
mode switches as follows:
COMM
MEMORY
WEATHER CH
...
Advice:
As shown in the display example below, you can
select the mode individually for the upper and lower
channels of the screen.
z
Changing the memory group (MEMORY
mode only)
Each time you press and hold the [
ENT
] key, the
memory group of the active channel is switched as
shown below:
All
GROUP1
...
GROUP9
...
Note:
Memory groups that do not have any memory
channels stored are not displayed.