64
22 BAND SELECT
Set the selectable bands (frequency band) for A band and B band individually. Stored
memory channels can be recalled regardless of this setting.
1. Press the [
A/B
] key to set the A band or B band as the operating band.
2. Press and hold the [
F
MENU
] key
touch [
CONFIG
]
[
22 BAND SELECT
]
3. Rotate the DIAL knob to select a band, then press the [
F
MENU
] key to remove the
check mark.
The frequency bands without check marks cannot be selected by operating the BAND
key, DIAL knob, VFO scan, etc.
AIR
:
VHF
:
UHF
:
OTHER
:
Including 50MHz band
*2
, VHF(1), VHF(2)
,
UHF(1)
, and
UHF(2)
*2
SW
*1
:
AM
*1
:
FM
*1
:
Remark
The default setting: All bands are checked.
NOTE:
Not all bands can be unchecked.
*1
Can be set only with the A band.
*2
Not included in the B band.
23 DIAL KNOB CHANGE
1. Press and hold the [
F
MENU
] key
touch [
CONFIG
]
[
23 DIAL KNOB CHANGE
]
2. Press the [
CHANGE
] key.
3. The VOL and DIAL knob functions are swapped.
Remark
The default setting: the upper knob is DIAL.
APRS Menu Operations
For details on setting each item, refer to “FT5DR/DE APRS Function Instruction Manual”
which is available on Yaesu website.
