62
14 RPT ARS
Enable or disable the automatic Repeater Shift operation ARS (Repeater operation is
initiated by tuning to the repeater frequency).
1. Press and hold the [
F
MENU
] key
touch [
CONFIG
]
[
14 RPT ARS
]
2. Rotate the DIAL knob to select the desired setting.
ON
Enables the ARS function.
OFF
Disables the ARS function.
Remark
The default setting: ON
15 RPT SHIFT
Set the TX frequency shift direction for repeater use.
1. Press and hold the [
F
MENU
] key
touch [
CONFIG
]
[
15 RPT SHIFT
]
2. Rotate the DIAL knob to select the desired setting.
SIMPLEX
No TX frequency offset.
-RPT
Shifts TX to a lower frequency.
+RPT
Shifts TX to a higher frequency.
Remark
The default setting differs depending frequency
16 RPT SHIFT FREQ
Set the repeater shift offset frequency.
1. Press and hold the [
F
MENU
] key
touch [
CONFIG
]
[
16 RPT SHIFT FREQ
]
2. Rotate the DIAL knob to select the desired shift offset.
3. The offset frequency can be set in steps of 0.05 MHz between 0.000 MHz and 150.000
MHz.
Remark
The default setting differs depending frequency
17 SAVE RX
Sets the Receive OFF Battery save interval (sleep ratio) to reduce power consumption.
1. Press and hold the [
F
MENU
] key
touch [
CONFIG
]
[
17 SAVE RX
]
2. Rotate the DIAL, then touch [
17 SAVE RX
].
3. Rotate the DIAL knob to select the desired setting (the time interval for disabling the
receiver operation).
0.05 sec(1:1) / 0.1 sec(1:2) / 0.2 sec(1:4) / 0.5 sec(1:10) / 1.0 sec(1:20) /
2.0 sec(1:40) / 5.0 sec(1:100) / 10.0 sec(1:200) / 20 sec(1:400) / OFF
Selecting OFF disables this function.
Remark
The default setting: 0.2 sec (1:1)
