Yaesu FT5Dr, Advance Manual

Page: 25 / 73

25
Activating the Dual Receive (D.RCV) feature
1. Set the frequency and communication mode to monitor continually.
The monitor frequency may be set on the VFO mode, the memory channel mode or
the HOME channel mode.
VFO Dual Receive VFO

Priority Memory Channel
Memory Channel Dual Receive Memory Channel

Priority Memory Channel
HOME Channel Dual Receive HOME channel

Priority Memory Channel
2. Press the [ F
MENU
] key

[ D.RCV ].
• If [ D.RCV ] is not displayed, touch [ BACK ← ] to display
[
D.RCV
] and then touch it.
• The dual receive function is activated and the following
icon is displayed on the top left of the display.
VFO Dual Receive
： VDR
Memory Channel Dual Receive
： MDR
(
/DXX/dXX
)*
HOME Channel Dual Receive
： HDR
* In the memory bank,
DXX
is displayed, and in the
memory bank where the bank link is set,
dXX
(
XX
is
a bank number) is displayed.
When a signal is received on the priority channel, the beep sounds, and the Dual
Receive function stops temporarily.
The combination of the frequency bands and modes for the Priority Memory Channel and
the receiver monitor frequency can be easily changed. Dual Receive may be operated with
the AMS function ON.
Setting the Dual Receive (D.RCV) Resume Conditions
1. Press and hold the [ F
MENU
] key

touch [ SCAN ]

[ 4 SCAN RESUME ].
2. Rotate the DIAL knob to select “ DW ”.
3. Press the [ F
MENU
] key, and then rotate the DIAL knob to select the resume condition
after halting in the Dual Receive function (default setting is “HOLD”).
2.0 sec ～ 10.0 sec The signal is received for the specified period of time, and then
the Dual Receive resumes.
The Dual Receive resume time may be set from 2 to 10 seconds
at 0.5 second intervals.
BUSY The signal is received until the signal fades out. Two seconds
after the signal fades out, the Dual Receive resumes.
HOLD The Dual Receive stops and tuning remains on the current
receive frequency. (The Dual Receive does not resume.)
4. Press the PTT switch to save the new setting and return to normal operation.
Press and hold the [ F
MENU
] key

touch [ SCAN ]

[ 6 PRIORITY REVERT ] is set to
“ ON ”, press the PTT switch to transmit, without waiting for activity to appear on the priority
channel. After transmitting, the transceiver receives the priority channel and Dual Receive
resumes after 5 seconds.